Development build — sample configuration

Use van stock and record materials on work orders

See what your crew's van carries, confirm the stock sent to it, record what you took, used and returned on each work order, and count the van, all from the field app.

Crews keep their materials in the van. The field app shows what the van carries and lets you record each movement against the work order it belongs to. Setting up locations, receiving stock and approving counts happen in the dashboard, as explained in Manage warehouse stock, receipts, transfers and stocktakes. A Field reader moves stock only in their own crew's van.

Before you start#

  • The stores have added you to your crew's van. Otherwise the app shows "You are not on any van".
  • Open the app while online before you leave. The van stock then shows as last read and works without a connection.

Step 1: Open the van stock#

  1. Open the Work orders tab and tap Van stock.
  2. Under Stock, each item shows its figures, for example "On hand 12 · Reserved 4". Items marked Below level are running low.
  3. If some stock steps have not been sent yet, the screen says how many are waiting.

Step 2: Confirm stock sent to the van#

  1. Under Transfers to confirm, find the transfer. It says where it comes from, for example "From" and the warehouse name.
  2. Check the items against what you were given and tap Confirm receipt.
  3. Read "Confirm the receipt?" and confirm with Confirm receipt.

Step 3: Record materials on a work order#

  1. Open the order from the Work orders tab and go to its Materials section. Each line shows Planned, reserved, issued, used and returned quantities.
  2. Before the job, tap Take on a line. Under Taken from, pick the van or warehouse, check the quantity and, for serialised items, enter the Serial numbers. Tap Confirm taken.
  3. After the job, tap Record used, enter the Quantity used and tap Record. It may differ from what was planned.
  4. If something is left over, tap Return, choose where it goes under Returned to and tap Return.

Step 4: Count the van#

  1. On Van stock, tap Count the van.
  2. For each item, enter what you find under Counted. Use Add an item you found for anything not on the list.
  3. Tap Save count.

What happens next#

Each step is saved on the phone first, with a message such as "Receipt saved. It will be sent when there is a connection." It waits on the To send tab until it goes through. Repeating a step after a failed send records it only once.

On a completed order, what was left over returns to stock and what was missing is taken from the van. Meters do not leave the stock from this screen: they leave when they are installed on the connection through the meter exchange.

A saved count goes to the dashboard as a stocktake. Someone with the supervise permission who took no part in it approves the differences there.

Common problems#

  • "You are not on any van". Ask the stores to add you to your crew's van.
  • "This item is counted in whole units." The item takes no decimals. Enter a whole number.
  • "The number of serials must match the quantity." Enter one serial number for each unit.
  • Take is missing on a line. The line is a meter, the planned quantity has already been taken, or the order is completed or cancelled.
  • A count quantity is refused. Type the number only, for example 12.5, without units.

Start today. Set up your utility in minutes.