Development build — sample configuration

Review flagged readings and decide disputes

Accept, reject or send back for a re-read the readings held by the plausibility check, and decide the reading disputes customers file.

Updated on

A reading that breaks from its meter's history is held for review and stays out of billing until someone decides on it. The Operations, Field supervisor and Administrator roles do this work; the Customer service role can also handle customer disputes.

Before you start#

  • Readings must have arrived, whether from the field app, a customer's own reading or an import.
  • The meter's dial digits should be set, so a rollover is not mistaken for a lower value.
  • Deciding a reading needs the reading review permission. Changing the value on a dispute also needs the reading correction permission.

Step 1: Open the review queue#

  1. In the menu, under Readings, open the Reading review tab.
  2. The header shows where you are in the queue. Press J for the next reading and K for the previous one.
  3. The badge beside the meter says why the reading was held: High consumption (more than three times the average of the last three months and above 15 m³), Negative value (lower than the previous reading with no plausible rollover) or No consumption (zero after months with usage).

Step 2: Compare it with the history#

  1. Check the Recorded value against the Previous reading and the Calculated consumption.
  2. If the Meter rollover line says the dial passed its limit, the consumption already allows for it.
  3. Open the Dial photo and read the Reader notes when they are there.

Step 3: Decide#

  1. If the value is right, select Accept reading (key A).
  2. If it is wrong, select Reject reading (key R), type the Reason and confirm with Reject.
  3. For a high consumption reading, select Request a new reading (key L) to send a reader back to the meter.

Step 4: Decide a customer dispute#

  1. Under Requests, open the Disputes tab and pick the account's row.
  2. In the panel, select Mark as under review while you check the case.
  3. To side with the customer, select Approve correction, enter the Corrected reading and write the Decision. To keep the reading, select Reject and write the Decision.

What happens next#

  • An accepted reading becomes Accepted and feeds consumption and the next billing run. A rejected reading becomes Rejected and no longer counts for billing.
  • A requested re-read is Scheduled for 09:00 the next day and is listed under Inspection requests. The reading itself stays in the queue until someone accepts or rejects it, and the panel shows the booked date.
  • Each held reading fires the reading.flagged event for automation rules.
  • Approving saves a corrected reading, already accepted, that replaces the original, and the dispute moves to Resolved. Rejecting leaves the reading as it was and the dispute moves to Rejected.

Common problems#

  • No decision buttons: the panel reads "You need review permission to decide on these readings." Ask an administrator for the Operations or Field supervisor role.
  • Request a new reading is greyed out: only high consumption readings come with an open re-read request. For any other reading, reject it with a reason so it is taken again.
  • The correction is refused: the corrected reading must be digits only, differ from the recorded one and not exceed the dial's maximum, and the original must be accepted. Customer service cannot correct readings: ask someone in Operations to approve it.

Start today. Set up your utility in minutes.