Development build — sample configuration

Record meter readings in the field with the mobile app

Walk your assigned route, record each meter's value with a photo when the app asks for one, and send the records saved on your phone once you have signal.

Updated on

The mobile app lets a Field reader read the meters of an assigned round in route order. Readings stay on the phone and reach the dashboard once there is signal.

Before you start#

  • Your account has the Field reader or Field supervisor role.
  • In the dashboard, your supervisor has created an assignment for you under Reading assignments.
  • The round and your assignment are In progress: the supervisor clicks Open round and Start round on the round, then Start on the assignment. Otherwise the server refuses the readings when they arrive.
  • Open the app while online before you leave, so it downloads the route and each meter's history.

Step 1: Open the route#

  1. Tap the Route tab. It shows the cycle and the list of stops, which you can filter by Pending or Read.
  2. Tap Start route (or Continue route if you have already begun). The Reading route screen opens with the meters in route order.
  3. You can also tap Continue route on the Today tab; the button shows how many meters are left to read.

Step 2: Record the reading#

  1. To make sure you are at the right meter, tap Confirm meter and scan the device code.
  2. Compare against the reference values on screen: Previous reading, Typical use and Expected reading.
  3. Type the number into Meter display value, using the meter's decimal places.
  4. When the reading is unusual, a photo becomes mandatory: tap Take photo.
  5. If useful, add a remark under Notes (optional).
  6. Tap Save reading. If the value is below the previous one or the consumption looks high, Confirm reading appears: choose Correct to fix the number or Confirm to keep it.
  7. If you cannot read the meter (locked gate, covered box), tap Could not read and record why.

Step 3: Send your records#

  1. When you save, the app tries to send the reading straight away. Without signal, it waits on the To send tab, which shows how many records are queued.
  2. Once you are back online, open To send and tap Send now.

What happens next#

After saving you see "Reading saved. It will be sent when you are online." On To send, each record moves to Sending and then to Sent. A reading that fails the plausibility check shows as Under review. In the dashboard, received readings appear under Readings, on the To validate tab, with the status Submitted or In review until someone accepts or rejects them.

Common problems#

  • "No route assigned yet": there is no active assignment in your name. Ask your supervisor to create one under Reading assignments, then reopen the tab while online.
  • A record shows Error: the server refused it, usually because the round or the assignment is not yet In progress, or because the meter is no longer active. Ask your supervisor to start the round, then tap Send now again.
  • You see "This meter only has 2 decimal places." (the number depends on the meter): you typed more decimals than the display has. Enter the number exactly as shown.
  • "This reading is unusual. Take a meter photo before saving.": take the photo; the reading is not saved without it.

Start today. Set up your utility in minutes.